Zhejiang Chinatide Solar & Luminous Energy Co.,Ltd
Add: No.28 Minfeng Road,Minfeng Industrial Park of Yuanhua Town, Haining City
Ben Shi: shreklove312.
Alice Yin: siberian0318
Jacky Guo: firstname.lastname@example.org
Julia Zhang: email@example.com
Amy Liu: firstname.lastname@example.org
Bella Li: email@example.com
Lisa Yang: firstname.lastname@example.org
Zero Cai: email@example.com
Viny Tian: firstname.lastname@example.org
Integrated Pressure Solar Water Heater
The tank for this model is a kind of closed type, the one with normal working pressure- 6bar, so it can be connected with city water directly. It will relief the pressure automatically, when the pressure is more than 6 bar inside the tank. And the water is heated rapidly by heat pipe which will transfer the heat energy into the tank (can refer the page 3 about heat pipe vacuum tube). This model can heat the water much faster than non-pressure and pre-heat models. The pressure of this model will be decided by the pressure of the tap water.
20GP/40HQ Loading Qty(sets)
Inner tank: SUS 304-2B/1.2mm, Φ360mm
Outer tank: Galvanized steel/0.41mm, Φ460mm
Insulation Layer: high density polyurethane foam 50mm
Vacuum tube: 58*1800mm/SS-CU-ALN or AL-N-AL coating
Bracket: Galvanized steel 1.5mm with 27/38/45 degree installing angle.
Electrical heating connection(inch): ¾ or 1¼
Water connection(inch):½ or ¾
NOTE: All the systems are available for the customization.
1.Temperature Monitor (showing hot water temperature inside the main tank)
2.Controller SR609 (showing hot water temperature inside the main tank & showing the water level & controlling the starting time of the electrical heater)
3.Electrical Heater (as back-up for cloudy or rainy days)